Sangra EZ (Multipick & Southern Specialties Handles)

Magnetic handles for your "popsicle" picks from Multipick and Southern Specialties are finally here. And these have a few new tricks up their sleeves.

Multipick and Southern Specialties largely share the same exact pick body dimensions with the only variance being the thickness of the picks. Rather than try to make, stock, and sell 5 or more different versions of handles for Multipick/Southern Specialties, 44 Delta wanted to design one handle that would work well for all of them. This benefits you as well because you can use the same handles for a wider variety of picks and sizes.

The Sangra EZ borrow from previous 44 Delta handles with respect to design aesthetics and pick attachment mechanisms. However, these Sangra EZ handles come with built-in shims that you can use to adapt to the different thickness picks and fine-tune the fitment for your needs.

The shims are 3D printed directly into the central body of the pick. To use them, you simply break them free (very easy) and install them in the magnet tracks after the magnets are installed. It's up to you how you want to use the shims. You can leave them uninstalled, installed on one half of the handle duo, or on both sides depending on what you need for your pick.

Additionally, some new tricks were employed to further enforce a better forward/aft fit-up. Toward the rear of the handle is a split and floating U-shaped feature that is designed to flex. This allows the handles to accept both the pick and the rear locking nub in a manner that better locks everything in place.

These handles are sold individually, meaning you will receive everything you need for complete assembly of one pick. This includes the 6 magnets.

Overview and Assembly

Specifically Tested for Compatibility With:

• Multipick: .5mm & .6mm
• Southern Specialties: 16 thou, 20 thou, & 25 thou
  

These handles are likely compatible with even more picks, as this popsicle shape seems to be common across manufacturers. If you have another brand of pick where the metal body is very close (within .1mm) of 79.1mm in length and 8.3mm in width, then there is a really good chance these handles will fit.

NOTE: These are NOT compatible with CI Summit/Genesis. Instead, for those picks, you want the Summit EZ handles from 44 Delta.

Features/Benefits

• Made specifically to work with Multipick (.5mm, .6mm) and Southern Specialties (16, 20, and 25 thou) "popsicle" style picks
• Easy on/easy off handle assembly with your pick
• Thickens, widens, and lengthens your picks for more comfort and control
• Split handle design with a total of 6 high powered N52 disc magnets keep these handles attached securely to your picks
• Built-in removable shims for adjusting to different thicknesses of picks and fine tuning to your own personal needs
  
• Notched tail for easy separation of both halves
• Split and floating U-shape at the rear of the pick for better forward/aft rigidity
• Incredible fit-up with your picks securing them tightly
• An amazing spectrum of unique colors for you to pick from so that you can match your preferred aesthetic
• You should be able to fit at least a couple of these in your typical travel pick cases

Shimming for a Tighter Fit

You may need to shim your raw pick handles to get a truly perfect fit for your needs. It's non-destructive and very easy to do. Try these handles as-is first. If you need a tighter fit, then please refer to this page for more information: Shimming for a Better Pick Handle Fit-Up

Dimensions: 90.65mm X 12.25mm X 7.6mm (when assembled)

Attribution of this design goes to eschlenz of 44 Delta